• Fixed the contact information for support
• Fixed occasional crashes caused by sensor re-positioning.
• Opted out of the Liquid Glass design. • Updated the contact information for support.
• Fixed the crash issue that occurs when there is a change in geometries while the sensor panel is still on.
• Fixed the truncating behavior of the domain grid size text in the control input panel. • Fixed the incrementing behavior when the control input stepper is not aligned with the step value. • Fixed the control input validator that occasionally causes a crash. • Fixed the crash caused by editing nodes out-of-bounds in the foil editor.
• Fixed the bug in the Particle visualization mode that caused crashes when no geometries were present. • Fixed the range of the Kinematic Viscosity control stepper to prevent occasional crashes.
• Added a control panel for more precise simulation input settings. • Added force and stress attributes to the analytics table. • Removed the inlet/wind speed restart upon geometry and other input changes. • Updated the fluid solver to accommodate a larger simulation domain size, increased tenfold from 1024x512 to 10240x5120. • Updated the presentation of forces exerted on solid bodies. • Fixed the issue preventing touch interactions in the sensor panel in editing mode. • Fixed the issue where sensors are added and moved randomly after others are removed. • Fixed the dimensionless attributes in the analytics panel when only one geometry is selected. NOTE: Due to the new implementation of the fluid solver to accommodate a significantly larger domain size, Streaklines and Pulseline flow visualizations require entirely new logic and are currently disabled. Additionally, rendering artifacts may be observed in other flow visualization modes. These issues will take some time to resolve and will be addressed in future updates.
• Fixed the issue of separators disappearing in the Aerofoil table upon selection.
• Added a zoom-out button to the analysis, sensor, and aerofoil sidebar panels. • Removed the sensor counter in the sensor sidebar panel. • Updated the positioning of the bottom buttons in the sensor sidebar panel. • Updated the asynchronous data flowing from the simulation to the app's UI. • Updated the algorithm for document saving and reading. • Updated the UI layout for the release notes screen. • Updated the sidebar table views with a custom selection gesture. • Updated the tint adjustment mode for the analysis and sensor sidebar panels when other views are presented on top. • Optimized data memory usage for the simulation. • Fixed the drawing for the aerofoil trailing edge's interior angle diagram. • Fixed the incorrect plotting data during the initial phase of inlet speed • Fixed the foil customization data flow that led to multiple foil editor instances. • Fixed the starting inlet speed that caused instability for thin aerofoil trailing edges.
• Fixed issues with the streamline, pulseline, and particle display modes not functioning correctly.
• Added the visualization of force distribution on solid objects. • Updated the cache mechanism for boundary nodes. • Updated user data flow to the simulation. • Updated the release notes list to include previous versions. • Updated the curl property name to Vorticity. NOTE: Beginning with this version, the release notes in the app and on the App Store will be identical. For previous versions, the in-app release notes are slightly reworded to match the updated format.
IMPROVEMENTS - Increased the inlet speed adjustment rate. - Doubled the incremental steps for simulation input parameters and fluid property scales. - Added a Tunnel-detail screen triggered by a pinch-in gesture. - Included diagrams for the boundary conditions used in the simulation. - Added in-app Release Notes to keep users more informed. - Optimized advection handling at the boundary nodes. FIXES - Resolved issues with force and sensor data readings caused by unanticipated GPU thread behavior. - Fixed the one-timestep advection issue following a simulation reset. - Addressed occasional crashes caused by invalid sensor plotting scales.
- Improved performance in calculating fluid properties, sensor data, and force extrema - Fixed an issue with thread sizing that caused incorrect force readings
- Resolved issue where simulation would reset upon file change - Improved data storage for more accurate sensor charts - Updated sensor count label for improved clarity - Fixed geometry positioning bug that caused frequent instability pop-up displays
- Resolved geometry drawing artifacts during modifications - Fixed a crash on simulation reset with the active Sensor panel - Consolidated all sensor charts into a single view with toggle options for each sensor - Introduced separate files to save geometry compositions and other simulation settings - Corrected crashes due to incorrect geometry coordinate conversion - Improved Gurney flap functionality in the Foil panel - Adjusted free parameters to enable simulations of higher Reynolds number flows - Replaced the geometry panel in the sidebar with a popup accessible from the Shape button in the tooling panel - Updated the UI layout for table headers in the Analysis, Sensor, and Foil panels - Modified simulation to start inlet velocity gradually from a rest state - Added an indicator for gradual changes in inlet velocity - Introduced a reference point for force readings to illustrate magnitudes - Optimized calculations for geometry subdivision - Enhanced calculation of geometry boundary nodes - Fixed crashes caused by NaN values passed from the simulation to the interface - Adjusted property scaling for simulation input changes - Removed navigation bars from active panels to make room for content
- Addressed several mesh compute issues - Fixed the force diagram not scaled properly
- Optimized airfoil drawing in editing - Added real-to-simulation time ratio to the status bar - Added caches for the stepper controls - Included lift-to-drag ratio calculation - Updated dimensionless equations with the approximation signs - Fixed density scaling
- Corrected the units of airfoil measurements - Fixed the airfoil subdividing calculation that caused occasional boundary artifacts - Applied the correct dark theme for the animation speed menu - Adjusted the airfoil drawing's UI - Updated the kinematic viscosity diagrams - Fixed airfoil redraw artifacts in editing
FIXED: - Fixed the timer and sensor graphs on simulation reset - Corrected the airfoil geometry's physic units - Adjusted the timer display for sensors - Improved UI of the scale range stepper controls and the geometry editing box - Enhanced the background drawing performance
FIXED: - Fixed the force's y-component direction - Resolved the issue causing crashes on sensor removals - Updated the Reynold Number equation with an approximation sign - Implemented automatic removal of current geometries on composition addition - Resolved the incorrect force distribution visualization after user interaction - Added a standard airfoil with zero angle of attack into Common Shape - Updated the tracer editor with the standard airfoil from Common Shape - Fixed the redrawing artifacts on zooms - Renamed Collection to Geometry - Renamed Analytics to Analysis - Added a timer panel for real-time and simulation time
FIXED: - Addressed occasional crashes and NaN displays for dimensionless quantities - Optimized boundary node calculation performance
NEW: - Added more geometries. - Added visualization for exerted force on geometries FIXED: - Fixed the issue that caused crashes when opening the exported file - Optimized geometries' boundary computation - Fixed fluid density scale - Improved the simulation stability
NEW: - Added a control for fluid density - Remove the progress bar for the change in inlet speed FIXED: - Fix the solid boundary bug that caused the instability within the solid domain for thin solid bodies
FIXED: - Fixed force calculation for the no-slip boundary
NEW: - Added visualizations to illustrate the individual components of the Reynolds Number, Drag Coefficient, and Lift Coefficient equations. FIXED: - Improved the boundary computation
IMPROVEMENT: - Fixed sensor chart's data line on scale change - Fixed element not rendering on drag - Fixed the breaking changes to the drag UI from the last update
NEW: - Added undo/redo for airfoil editing - Added tunnel dimensions and boundary types on zoom-out FIXED: - Improved object selection UI logic - Corrected simulation issues with multiple objects - Fixed airfoil element not updating in editing mode - Fixed the vertical axis of the sensor graph on scale change
Minor UI improvements and bugs fixed.
Minor UI improvements and bugs fixed.