Netatmo weather stations (and additional modules), air quality sensors (Aircare or Healthy Home Coach), thermostats and valves support configured on your Netatmo account in a same application HomeAtmo allows you to display a summary or detailed dashboard of your measurements: The interface has been developed to offer a global view and to be able to compare values ​​of the same kind from different sensors. You can compare, for example, the humidity level of any sensor measuring it at a glance. A detailed view, accessible with a single click, allows you to display additional data such as the battery level, the signal quality of each sensor and much more. By remaining 2 seconds on the name of one of your sensors or one of your measurements in the dashboard, you can also view additional information such as the exact time of measurement, the location, the date of installation and sensor configuration or description of the measurement. The display of your measurements is refreshed automatically. The application also allows you to easily switch from displaying data from one weather station to another if you have associated several weather stations with your Netatmo account. A filter can be applied to display the dashboard: by station, by location or even all stations. HomeAtmo allows you to display and customize measurements in the menu bar: You can configure a bar of measurements for each display filter. By default, you can select up to two measurements in the menu bar from the current temperature, with or without trend, for the main station and the outdoor sensor. The display order is configurable. Optionally, through the integrated purchase "Premium bar of measures" in the application, you can select up to 6 measures to be displayed in the menu bar amongst any sensor and type of measurement you have and choose their display order. Customization is therefore total and you can change this bar of measures as often as you wish! You can also configure in the bar: - the size of the font. - display of units. - display of the HomeAtmo icon. - display of icons in front of your measurements. - addition of a separator between each measurement. Leaving your mouse for more than 2 seconds on one of the values ​​displayed in the bar gives you access to some additional information. HomeAtmo also gives you access to a multi-curve display module: You can display the curves of the same type of measurements from all your sensors on the same graph! By default, you can view and export the temperature curves for the main station and the outdoor sensor over the past twelve hours. Optionally, through the integrated purchase "HomeAtmo Premium Graphics" in the application, you have access to the multi-curve display for temperature, setpoint temperature, CO2 level, relative and absolute humidity, noise , atmospheric pressure for the station, outdoor sensor or even for the additional indoor sensors. The cumulative precipitation curve is also available for the rain gauge as well as the wind speed and gust curves for the anemometer. With this option, you can select the viewing period of your choice, namely 12 hours, 24 hours, 72 hours, 7 days, 15 days, 30 days, 90 days, 6 months and 1 year and move through the history of your measurements. Depending on the measurement displayed, you can view the average, the total or the minimum and maximum value on the displayed period. An interactive cursor allows you to view the value of the measurement at a given time. All these measurements can be exported in CSV format. HomeAtmo supports the user preferences of the Netatmo account for measurement units: - C° or F°. - mbar, inHg or mmHg. - mm or inch. - km/h, mph, m/s, knot, beaufort.