10.1.0 - New immersive 3d terrain map with optional slope, elevation, or aspect shading 10.2.0 - Adding 3d terrain map to route planner page 10.3.0 - See lift/run stats during 3d playback 10.5.0 - Show lift, run, and jump stats when touched on 3d map page 10.6.0 - The Health on an activity tab now calculate Training Stress Score and the Main screen includes charts for Intensity Distribution and Training Load 10.7 - App can now pair with Bluetooth speed sensors.
10.1.0 - New immersive 3d terrain map with optional slope, elevation, or aspect shading 10.2.0 - Adding 3d terrain map to route planner page 10.3.0 - See lift/run stats during 3d playback 10.5.0 - Show lift, run, and jump stats when touched on 3d map page 10.6.0 - The Health on an activity tab now calculate Training Stress Score and the Main screen includes charts for Intensity Distribution and Training Load 10.7 - App can now pair with Bluetooth speed sensors.
10.1.0 - New immersive 3d terrain map with optional slope, elevation, or aspect shading 10.2.0 - Adding 3d terrain map to route planner page 10.3.0 - See lift/run stats during 3d playback 10.5.0 - Show lift, run, and jump stats when touched on 3d map page 10.6.0 - The Health on an activity tab now calculate Training Stress Score and the Main screen includes charts for Intensity Distribution and Training Load 10.7 - App can now pair with Bluetooth speed sensors.
10.1.0 - New immersive 3d terrain map with optional slope, elevation, or aspect shading 10.2.0 - Adding 3d terrain map to route planner page 10.3.0 - See lift/run stats during 3d playback 10.5.0 - Show lift, run, and jump stats when touched on 3d map page 10.6.0 - The Health on an activity tab now calculate Training Stress Score and the Main screen includes charts for Intensity Distribution and Training Load 10.7 - App can now pair with Bluetooth speed sensors.
10.1.0 - New immersive 3d terrain map with optional slope, elevation, or aspect shading 10.2.0 - Adding 3d terrain map to route planner page 10.3.0 - See lift/run stats during 3d playback 10.4.0 - Adding jumps to 3d map and fixed a couple bugs 10.5.0 - Show lift, run, and jump stats when touched on 3d map page 10.6.0 - The Health on an activity tab now calculate Training Stress Score and the Main screen includes charts for Intensity Distribution and Training Load
10.1.0 - New immersive 3d terrain map with optional slope, elevation, or aspect shading 10.2.0 - Adding 3d terrain map to route planner page 10.3.0 - See lift/run stats during 3d playback 10.4.0 - Adding jumps to 3d map and fixed a couple bugs 10.5.0 - Show lift, run, and jump stats when touched on 3d map page 10.6.0 - The Health on an activity tab now calculate Training Stress Score and the Main screen includes charts for Intensity Distribution and Training Load
10.1.0 - New immersive 3d terrain map with optional slope, elevation, or aspect shading 10.2.0 - Adding 3d terrain map to route planner page 10.3.0 - See lift/run stats during 3d playback 10.4.0 - Adding jumps to 3d map and fixed a couple bugs 10.5.0 - Show lift, run, and jump stats when touched on 3d map page 10.6.0 - The Health on an activity tab now calculate Training Stress Score and the Main screen includes charts for Intensity Distribution and Training Load
10.1.0 - New immersive 3d terrain map with optional slope, elevation, or aspect shading 10.2.0 - Adding 3d terrain map to route planner page 10.3.0 - See lift/run stats during 3d playback 10.4.0 - Adding jumps to 3d map and fixed a couple bugs 10.5.0 - Show lift, run, and jump stats when touched on 3d map page 10.6.0 - The Health on an activity tab now calculate Training Stress Score and the Main screen includes charts for Intensity Distribution and Training Load
10.1.0 - New immersive 3d terrain map with optional slope, elevation, or aspect shading 10.2.0 - Adding 3d terrain map to route planner page 10.3.0 - See lift/run stats during 3d playback 10.4.0 - Adding jumps to 3d map and fixed a couple bugs 10.5.0 - Show lift, run, and jump stats when touched on 3d map page 10.6.0 - The Health on an activity tab now calculate Training Stress Score and the Main screen includes charts for Intensity Distribution and Training Load
10.1.0 - New immersive 3d terrain map with optional slope, elevation, or aspect shading 10.2.0 - Adding 3d terrain map to route planner page 10.3.0 - See lift/run stats during 3d playback 10.4.0 - Adding jumps to 3d map and fixed a couple bugs 10.5.0 - Show lift, run, and jump stats when touched on 3d map page 10.6.0 - The Health on an activity tab now calculate Training Stress Score and the Main screen includes charts for Intensity Distribution and Training Load
10.1.0 - New immersive 3d terrain map with optional slope, elevation, or aspect shading 10.2.0 - Adding 3d terrain map to route planner page 10.3.0 - See lift/run stats during 3d playback 10.4.0 - Adding jumps to 3d map and fixed a couple bugs 10.5.0 - Show lift, run, and jump stats when touched on 3d map page 10.6.0 - The Health on an activity tab now calculate Training Stress Score and the Main screen includes charts for Intensity Distribution and Training Load
10.1.0 - New immersive 3d terrain map with optional slope, elevation, or aspect shading 10.2.0 - Adding 3d terrain map to route planner page 10.3.0 - See lift/run stats during 3d playback 10.4.0 - Adding jumps to 3d map and fixed a couple bugs 10.5.0 - Show lift, run, and jump stats when touched on 3d map page
10.1.0 - New immersive 3d terrain map with optional slope, elevation, or aspect shading 10.2.0 - Adding 3d terrain map to route planner page 10.3.0 - See lift/run stats during 3d playback 10.4.0 - Adding jumps to 3d map and fixed a couple bugs 10.5.0 - Show lift, run, and jump stats when touched on 3d map page
10.1.0 - New immersive 3d terrain map with optional slope, elevation, or aspect shading 10.2.0 - Adding 3d terrain map to route planner page 10.3.0 - See lift/run stats during 3d playback 10.4.0 - Adding jumps to 3d map and fixed a couple bugs 10.5.0 - Show lift, run, and jump stats when touched on 3d map page
10.1.0 - New immersive 3d terrain map with optional slope, elevation, or aspect shading 10.2.0 - Adding 3d terrain map to route planner page 10.3.0 - See lift/run stats during 3d playback 10.4.0 - Adding jumps to 3d map and fixed a couple bugs 10.5.0 - Show lift, run, and jump stats when touched on 3d map page
10.1.0 - New immersive 3d terrain map with optional slope, elevation, or aspect shading 10.2.0 - Adding 3d terrain map to route planner page 10.3.0 - See lift/run stats during 3d playback 10.4.0 - Adding jumps to 3d map and fixed a couple bugs 10.5.0 - Show lift, run, and jump stats when touched on 3d map page
10.1.0 - New immersive 3d terrain map with optional slope, elevation, or aspect shading 10.2.0 - Adding 3d terrain map to route planner page 10.3.0 - See lift/run stats during 3d playback 10.4.0 - Adding jumps to 3d map and fixed a couple bugs 10.5.0 - Show lift, run, and jump stats when touched on 3d map page
10.1.0 - New immersive 3d terrain map with optional slope, elevation, or aspect shading 10.2.0 - Adding 3d terrain map to route planner page 10.3.0 - See lift/run stats during 3d playback 10.4.0 - Adding jumps to 3d map and fixed a couple bugs
10.1.0 - New immersive 3d terrain map with optional slope, elevation, or aspect shading 10.2.0 - Adding 3d terrain map to route planner page 10.3.0 - See lift/run stats during 3d playback
10.1.0 - New immersive 3d terrain map with optional slope, elevation, or aspect shading 10.2.0 - Adding 3d terrain map to route planner page 10.3.0 - See lift/run stats during 3d playback
10.1.0 - New immersive 3d terrain map with optional slope, elevation, or aspect shading 10.2.0 - Adding 3d terrain map to route planner page
10.0.0 - Adding new Map Layers -Live Map screen is now available when recording a new activity 10.1.0 - New immersive 3d terrain map with optional slope, elevation, or aspect shading
Adding new Map Layers Live Map screen is now available when recording a new activity
Adding new Map Layers Live Map screen is now available when recording a new activity
Adding two new activity types: Backcountry Snowboard and Indoor Bike.
Adding two new activity types: Backcountry Snowboard and Indoor Bike.
Adding option to include heart rate and power to video overlay. Now showing up and down distance of jumps on the video overlay (instead of total/combined up/down vertical). Fixed bug where saving an activity could hang when the device was offline. Improved performance of save for very large activities. A few other performance improvements.
Adding option to include heart rate and power to video overlay. Now showing up and down distance of jumps on the video overlay (instead of total/combined up/down vertical). Fixed bug where saving an activity could hang when the device was offline. Improved performance of save for very large activities. A few other performance improvements.
Adding option to include heart rate and power to video overlay. Now showing up and down distance of jumps on the video overlay (instead of total/combined up/down vertical). Fixed bug where saving an activity could hang when the device was offline. Improved performance of save for very large activities.
9.24.9 - Fixed bug where activity list was not refreshing after importing a GPX file and fixed a couple other small bugs. 9.24.8 - Improved drop detection for very large drops
9.24.8 - Improved drop detection for very large drops
9.24.7 - Improved drop detection for very large drops
9.24.5 - Improved drop detection for very large drops
9.24.5 - Improved drop detection for very large drops
9.24.1 - You can now add a Power Meter or Heart Rate Monitor from the upper right menu of the main screen. You can then view the live stats from these devices during an activity, or after when viewing a saved activity. 9.24.2 - 9.24.4 - Moving power and heart rate data to a new Health tab
9.24.1 - You can now add a Power Meter or Heart Rate Monitor from the upper right menu of the main screen. You can then view the live stats from these devices during an activity, or after when viewing a saved activity. 9.24.2 - Moving power and heart rate data to a new Health tab
9.24.1 - Power meter and heart rate devices can now be configured to automatically connect upon app start. 9.24.0 - You can now add a Power Meter or Heart Rate Monitor from the upper right menu of the main screen. You can then view the live stats from these devices during an activity, or after when viewing a saved activity.
You can now add a Power Meter or Heart Rate Monitor from the upper right menu of the main screen. You can then view the live stats from these devices during an activity, or after when viewing a saved activity.
9.23.4 - Fixed bug that caused the app to crash on the home screen for some users. 9.23.3 - The Segments Page now shows segments you created and favorited segments. Also fixed a few bugs. 9.23.0 - A couple performance improvements and adding a new Compare tab when two rides are selected for compare. 9.22.13 - Improved lift detection for MTB activities 9.22.12 - You can now see a grid of your top 10 efforts on the Segment History Page
9.23.3 - The Segments Page now shows segments you created and favorited segments. Also fixed a few bugs. 9.23.0 - A couple performance improvements and adding a new Compare tab when two rides are selected for compare. 9.22.13 - Improved lift detection for MTB activities 9.22.12 - You can now see a grid of your top 10 efforts on the Segment History Page
9.23.0 - A couple performance improvements and adding a new Compare tab when two rides are selected for compare. 9.22.13 - Improved lift detection for MTB activities 9.22.12 - You can now see a grid of your top 10 efforts on the Segment History Page9.22.11 - A couple performance improvements 9.22.8 - A graph of power history now shows up on the Segment History page, next to the time history 9.22.4 - Fixed bug where rider height values set when editing your profile was saving incorrectly when the device was set to use metric units 9.22.2 - Fixed bug that caused jumps not to be detected in rare situations on some devices
9.23.0 - A couple performance improvements and adding a new Compare tab when two rides are selected for compare. 9.22.13 - Improved lift detection for MTB activities 9.22.12 - You can now see a grid of your top 10 efforts on the Segment History Page9.22.11 - A couple performance improvements 9.22.8 - A graph of power history now shows up on the Segment History page, next to the time history 9.22.4 - Fixed bug where rider height values set when editing your profile was saving incorrectly when the device was set to use metric units 9.22.2 - Fixed bug that caused jumps not to be detected in rare situations on some devices
9.22.13 - Improved lift detection for MTB activities 9.22.12 - You can now see a grid of your top 10 efforts on the Segment History Page9.22.11 - A couple performance improvements 9.22.8 - A graph of power history now shows up on the Segment History page, next to the time history 9.22.4 - Fixed bug where rider height values set when editing your profile was saving incorrectly when the device was set to use metric units 9.22.2 - Fixed bug that caused jumps not to be detected in rare situations on some devices
9.22.13 - Improved lift detection for MTB activities 9.22.12 - You can now see a grid of your top 10 efforts on the Segment History Page9.22.11 - A couple performance improvements 9.22.8 - A graph of power history now shows up on the Segment History page, next to the time history 9.22.4 - Fixed bug where rider height values set when editing your profile was saving incorrectly when the device was set to use metric units 9.22.2 - Fixed bug that caused jumps not to be detected in rare situations on some devices
9.22.12 - You can now see a grid of your top 10 efforts on the Segment History Page9.22.11 - A couple performance improvements 9.22.8 - A graph of power history now shows up on the Segment History page, next to the time history 9.22.4 - Fixed bug where rider height values set when editing your profile was saving incorrectly when the device was set to use metric units 9.22.2 - Fixed bug that caused jumps not to be detected in rare situations on some devices
9.22.11 - A couple performance improvements 9.22.8 - A graph of power history now shows up on the Segment History page, next to the time history 9.22.4 - Fixed bug where rider height values set when editing your profile was saving incorrectly when the device was set to use metric units 9.22.2 - Fixed bug that caused jumps not to be detected in rare situations on some devices 9.22.0 - Now detects Lift Wait Time as a separate metric from Lift Duration or Run Duration. -Improved lift detection for smaller lifts.
9.22.8 - A graph of power history now shows up on the Segment History page, next to the time history 9.22.4 - Fixed bug where rider height values set when editing your profile was saving incorrectly when the device was set to use metric units 9.22.2 - Fixed bug that caused jumps not to be detected in rare situations on some devices 9.22.0 - Now detects Lift Wait Time as a separate metric from Lift Duration or Run Duration. -Improved lift detection for smaller lifts.
9.22.8 - A graph of power history now shows up on the Segment History page, next to the time history 9.22.4 - Fixed bug where rider height values set when editing your profile was saving incorrectly when the device was set to use metric units 9.22.2 - Fixed bug that caused jumps not to be detected in rare situations on some devices 9.22.0 - Now detects Lift Wait Time as a separate metric from Lift Duration or Run Duration. -Improved lift detection for smaller lifts.
9.22.8 - A graph of power history now shows up on the Segment History page, next to the time history 9.22.4 - Fixed bug where rider height values set when editing your profile was saving incorrectly when the device was set to use metric units 9.22.2 - Fixed bug that caused jumps not to be detected in rare situations on some devices 9.22.0 - Now detects Lift Wait Time as a separate metric from Lift Duration or Run Duration. -Improved lift detection for smaller lifts.
9.22.7 - Fixed a few bugs. 9.22.4 - Fixed bug where rider height values set when editing your profile was saving incorrectly when the device was set to use metric units 9.22.2 - Fixed bug that caused jumps not to be detected in rare situations on some devices 9.22.0 - Now detects Lift Wait Time as a separate metric from Lift Duration or Run Duration. -Improved lift detection for smaller lifts.
9.22.4 - Fixed bug where rider height values set when editing your profile was saving incorrectly when the device was set to use metric units 9.22.2 - Fixed bug that caused jumps not to be detected in rare situations on some devices 9.22.0 - Now detects Lift Wait Time as a separate metric from Lift Duration or Run Duration. -Improved lift detection for smaller lifts.
9.22.4 - Fixed bug where height values set from the edit profile page were saving incorrectly when the device was set to use metric units 9.22.0 - Now detects Lift Wait Time as a separate metric from Lift Duration or Run Duration. -Improved lift detection for smaller lifts. 9.21.0 - GPX routes can now be imported and used for navigation when recording a new activity 9.20.0 - Added a live power meter screen that shows current power stats (watts) and calories when recording either cycling or hiking activities.
9.22.4 - Fixed bug where height values set from the edit profile page were saving incorrectly when the device was set to use metric units 9.22.0 - Now detects Lift Wait Time as a separate metric from Lift Duration or Run Duration. -Improved lift detection for smaller lifts. 9.21.0 - GPX routes can now be imported and used for navigation when recording a new activity 9.20.0 - Added a live power meter screen that shows current power stats (watts) and calories when recording either cycling or hiking activities.
9.22.0 - Now detects Lift Wait Time as a separate metric from Lift Duration or Run Duration. -Improved lift detection for smaller lifts. 9.21.0 - GPX routes can now be imported and used for navigation when recording a new activity 9.20.0 - Added a live power meter screen that shows current power stats (watts) and calories when recording either cycling or hiking activities.
9.22.0 - Now detects Lift Wait Time as a separate metric from Lift Duration or Run Duration. -Improved lift detection for smaller lifts. 9.21.0 - GPX routes can now be imported and used for navigation when recording a new activity 9.20.0 - Added a live power meter screen that shows current power stats (watts) and calories when recording either cycling or hiking activities.
9.22.0 - Now detects Lift Wait Time as a separate metric from Lift Duration or Run Duration. -Improved lift detection for smaller lifts. 9.21.0 - GPX routes can now be imported and used for navigation when recording a new activity 9.20.0 - Added a live power meter screen that shows current power stats (watts) and calories when recording either cycling or hiking activities.
9.21.0 - GPX routes can now be imported and used for navigation when recording a new activity 9.20.0 - Added a live power meter screen that shows current power stats (watts) and calories when recording either cycling or hiking activities.
9.21.0 - GPX routes can now be imported and used for navigation when recording a new activity 9.20.0 - Added a live power meter screen that shows current power stats (watts) and calories when recording either cycling or hiking activities.
9.21.0 - GPX routes can now be imported and used for navigation when recording a new activity 9.20.0 - Added a live power meter screen that shows current power stats (watts) and calories when recording either cycling or hiking activities.
Added a live power meter screen that shows current power stats (watts) and calories when recording either cycling or hiking activities
-Improved accuracy when following a previously recorded activity. Particularly when going off track and returning or when starting to follow an activity that you have already partially completed. -Lots of other small fixes and improvements.
-Adding new "Pocket" orientation option when saving a cycling activity. However, riding with your device in a pocket or backpack will result in no turns stats being detected (lean angle, g-Force, etc.) -Calculate power output (watts) for MTB activities. Be sure to set your correct weight and tire type in your profile for accurate power estimates. -Scenario calculator that shows how your time and average speed would change based on changes to your weight, tire type, or power.
-Adding new "Pocket" orientation option when saving a cycling activity. However, riding with your device in a pocket or backpack will result in no turns stats being detected (lean angle, g-Force, etc.) -Calculate power output (watts) for MTB activities. Be sure to set your correct weight and tire type in your profile for accurate power estimates. -Scenario calculator that shows how your time and average speed would change based on changes to your weight, tire type, or power.
-Adding new "Pocket" orientation option when saving a cycling activity. However, riding with your device in a pocket or backpack will result in no turns stats being detected (lean angle, g-Force, etc.) -Calculate power output (watts) for MTB activities. Be sure to set your correct weight and tire type in your profile for accurate power estimates. -Scenario calculator that shows how your time and average speed would change based on changes to your weight, tire type, or power.
-Adding new "Pocket" orientation option when saving a cycling activity. However, riding with your device in a pocket or backpack will result in no turns stats being detected (lean angle, g-Force, etc.) -Calculate power output (watts) for MTB activities. Be sure to set your correct weight and tire type in your profile for accurate power estimates. -Scenario calculator that shows how your time and average speed would change based on changes to your weight, tire type, or power.
-Calculate power output (watts) for MTB activities. Be sure to set your correct weight and tire type in your profile for accurate power estimates. -Scenario calculator that shows how your time and average speed would change based on changes to your weight, tire type, or power. -Overlay projects can now be saved and resumed at a later time -Fixed a couple small bugs that could cause odd resolutions/framerate combinations to crash when encoding an overlay
-Calculate power output (watts) for MTB activities. Be sure to set your correct weight and tire type in your profile for accurate power estimates. -Scenario calculator that shows how your time and average speed would change based on changes to your weight, tire type, or power. -Overlay projects can now be saved and resumed at a later time -Fixed a couple small bugs that could cause odd resolutions/framerate combinations to crash when encoding an overlay
-Calculate power output (watts) for MTB activities. Be sure to set your correct weight and tire type in your profile for accurate power estimates. -Scenario calculator that shows how your time and average speed would change based on changes to your weight, tire type, or power. -Overlay projects can now be saved and resumed at a later time -Fixed a couple small bugs that could cause odd resolutions/framerate combinations to crash when encoding an overlay
-Calculate power output (watts) for MTB activities. Be sure to set your correct weight and tire type in your profile for accurate power estimates. -Scenario calculator that shows how your time and average speed would change based on changes to your weight, tire type, or power. -Overlay projects can now be saved and resumed at a later time -Fixed a couple small bugs that could cause odd resolutions/framerate combinations to crash when encoding an overlay
-Calculate power output (watts) for MTB activities. Be sure to set your correct weight and tire type in your profile for accurate power estimates. -Scenario calculator that shows how your time and average speed would change based on changes to your weight, tire type, or power. -Overlay projects can now be saved and resumed at a later time -Fixed a couple small bugs that could cause odd resolutions/framerate combinations to crash when encoding an overlay
-Calculate power output (watts) for MTB activities. Be sure to set your correct weight and tire type in your profile for accurate power estimates. -Scenario calculator that shows how your time and average speed would change based on changes to your weight, tire type, or power. -Overlay projects can now be saved and resumed at a later time -Fixed a couple small bugs that could cause odd resolutions/framerate combinations to crash when encoding an overlay
Adding turn stats to telemetry overlay videos Fixed a couple bugs Added filter for custom time period to the advanced search of activities
Adding turn stats to telemetry overlay videos Fixed a couple bugs
Adding turn stats to telemetry overlay videos Fixed a couple bugs
Adding turn stats to telemetry overlay videos Fixed a couple bugs
Adding new Audio AutoSync method that does not require QR codes. See demo at the link below: https://youtu.be/xz8wS3QPGmY Fixed bug where users were unable to upgrade to the paid version of the app Added option to reduce wind noises Adding volume setting for sound track
Adding new Audio AutoSync method that does not require QR codes. See demo at the link below: https://youtu.be/xz8wS3QPGmY Fixed bug where users were unable to upgrade to the paid version of the app Added option to reduce wind noises Adding volume setting for sound track
Adding new Audio AutoSync method that does not require QR codes. See demo at the link below: https://youtu.be/xz8wS3QPGmY Fixed bug where users were unable to upgrade to the paid version of the app Added option to reduce wind noises Adding volume setting for sound track
Adding new Audio AutoSync method that does not require QR codes. See demo at the link below: https://youtu.be/xz8wS3QPGmY Fixed bug where users were unable to upgrade to the paid version of the app Added option to reduce wind noises Adding volume setting for sound track
Fixed bug where users were unable to upgrade to the paid version of the app Added option to reduce wind noises Adding volume setting for sound track
Fixed bug where users were unable to upgrade to the paid version of the app Added option to reduce wind noises Adding volume setting for sound track
Background music tracks can now be added to overlay videos.
When creating a telemetry overlay video, more than one trim point can now be added to a single input video. Added fullscreen button to overlay video preview Fixed bug where Backtracking an activity was showing the wrong unit for remaining climb & descent. Fixed bug where overlay progress percent could show an incorrect value Fixed a couple bugs that caused a smaller percentage of activities to fail to open
When creating a telemetry overlay video, more than one trim point can now be added to a single input video. Added fullscreen button to overlay video preview Fixed bug where Backtracking an activity was showing the wrong unit for remaining climb & descent. Fixed bug where overlay progress percent could show an incorrect value Fixed a couple bugs that caused a smaller percentage of activities to fail to open
When creating a telemetry overlay video, more than one trim point can now be added to a single input video. Added fullscreen button to overlay video preview Fixed bug where Backtracking an activity was showing the wrong unit for remaining climb & descent. Fixed bug where overlay progress percent could show an incorrect value Fixed a couple bugs that caused a smaller percentage of activities to fail to open
When creating a telemetry overlay video, more than one trim point can now be added to a single input video. Added fullscreen button to overlay video preview Fixed bug where Backtracking an activity was showing the wrong unit for remaining climb & descent. Fixed bug where overlay progress percent could show an incorrect value Fixed a couple bugs that caused a smaller percentage of activities to fail to open
When creating a telemetry overlay video, more than one trim point can now be added to a single input video. Added fullscreen button to overlay video preview Fixed bug where Backtracking an activity was showing the wrong unit for remaining climb & descent. Fixed bug where overlay progress percent could show an incorrect value
Includes a number of bug fixes as well as a much improved options to create overlays. You can now automatically sync your action camera videos using a QR code from the app. See a demo in the link below. https://youtu.be/0BZCEqJFYmA
Includes a number of bug fixes as well as a much improved options to create overlays. You can now automatically sync your action camera videos using a QR code from the app. See a demo in the link below. https://youtu.be/0BZCEqJFYmA
Includes a number of bug fixes as well as a much improved options to create overlays. You can now automatically sync your action camera videos using a QR code from the app. See a demo in the link below. https://youtu.be/0BZCEqJFYmA
Added new option to sync overlays using audio Added new jump animation to overlays
Added new option to sync overlays using audio Added new jump animation to overlays
Fixed bug where overlay processing would hang at the start on some devices
Elevation profile is now visible when viewing/creating segments
Fixes bug where IOS devices could fail to receive radio communication from other device types
-Updating beacon view screen to show a radar map with the relative positions of all active beacons that are shared with you. Individual beacons can still be selected for additional detail, or radio communication. -Fixed bug that was causing horizontal jump distance to calculate incorrectly on some devices
Performance enhancements for users that login into the app on multiple devices
A couple small performance improvements and improved zooming on elevation profile.
A couple small performance improvements and improved zooming on elevation profile.
When recording a new activity, the remaining time is shown for any active segment.
Small Bug Fix
Small bug fix
You will now see a new screen option when recording a new activity that shows the position of any active beacons that have been shared with you. This new screen makes it easy to find a friend if you get split up on the trail. You will only see the new screen if at least one other person has shared their beacon with you.
You will now see a new screen option when recording a new activity that shows the position of any active beacons that have been shared with you. This new screen makes it easy to find a friend if you get split up on the trail. You will only see the new screen if at least one other person has shared their beacon with you.
Forget to stop your recording? Activities can now be trimmed after saving.
Forget to stop your recording? Activities can now be trimmed after saving.
Improved accuracy of lift detection - Especially in areas with poor GPS reception Lifts and runs from the Lifts tab can now be selected to show the lift or run on the map Fixed bug where screen would turn black if a ride was edited immediately after saving A few small performance optimizations when extracting longer activities
Added Activity Type filter to Advanced Search A couple small bug and formatting fixes
Lift rides not longer affect max or or average grade calculations. Max/average grade is only determined by non-lift GPS and elevation data.
Stats about your last downhill snowboard run can now be seen live during a recording. The run stats will be available after one lift ride has been completed. Previously run stats could only be viewed after a recording was saved. Fixed bug where Live Segments page was not showing up during a recording for some configurations. Now, if you have saved a segment, you can always see your progress on a segment during a recording.
9.8.2 - Higher resolution elevation profiles for longer activities 9.8.0 - Stats for Runs and Lifts are now available on the Lift tab when viewing a recorded activity. The elevation gain accumulated during the lift ride will be automatically deducted from the activity’s total climb stats. This ensures climb stats throughout the app only include human effort and exclude elevation gain from lift rides. Lifts will also be colored purple on the map view.
9.8.1 - Fixed bug where elevation would drop to zero when GPS returned a lat/long point with very low accuracy. 9.8.0 - Stats for Runs and Lifts are now available on the Lift tab when viewing a recorded activity. The elevation gain accumulated during the lift ride will be automatically deducted from the activity’s total climb stats. This ensures climb stats throughout the app only include human effort and exclude elevation gain from lift rides. Lifts will also be colored purple on the map view.
Stats for Runs and Lifts are now available on the Lift tab when viewing a recorded activity. The elevation gain accumulated during the lift ride will be automatically deducted from the activity’s total climb stats. This ensures climb stats throughout the app only include human effort and exclude elevation gain from lift rides. Lifts will also be colored purple on the map view.
Lift rides are automatically detected and the elevation gain accumulated during the lift ride will be automatically deducted from the activity’s total climb stats. This ensures climb stats throughout the app only include human effort and exclude elevation gain from lift rides. Lifts will also be colored purple on the map view. I will do more with the lift stats in the next release.
Roughly 30-40% performance improvement when encoding an overlay video.
You can now save different activity types (MTB, eBike, Road Bike, etc), and fixed a few bugs.
9.6.3 - A few small performance improvements and bug fixes. 9.6.1 - Fixed bug where some metric units were incorrect on the Video Overlays 9.6.0 - Adding history widgets to the home screen 9.5.0 - The screen no longer needs to stay on while recording a ride. Added horizontal jump distance to jump stats. 9.2.0 & 9.3.0 - When creating an overlay video, you can now auto slow-mo your jumps and turns. 9.0.0 - Telemetry Overlay. With this new feature you can upload a video of your ride, then sync it with the app’s telemetry data and export a video.
9.6.1 - Fixed bug where some metric units were incorrect on the Video Overlays 9.6.0 - Adding history widgets to the home screen 9.5.0 - The screen no longer needs to stay on while recording a ride. Added horizontal jump distance to jump stats. 9.2.0 & 9.3.0 - When creating an overlay video, you can now auto slow-mo your jumps and turns. 9.0.0 - Telemetry Overlay. With this new feature you can upload a video of your ride, then sync it with the app’s telemetry data and export a video.
9.5.2 - The screen no longer needs to stay on while recording a ride. Added horizontal jump distance to jump stats 9.4.0 - Now overlay widgets can be enabled/disabled in Overlay Settings 9.3.0 - When creating an overlay video, you can now auto slow-mo your turns. 9.2.0 - When creating an overlay video, you can now auto slow-mo your jumps. 9.0.7 - Telemetry Overlay. With this new feature you can upload a video of your ride, then sync it with the app’s telemetry data and export a video.
9.5.0 - The screen no longer needs to stay on while recording a ride 9.4.0 - Now overlay widgets can be enabled/disabled in Overlay Settings 9.3.0 - When creating an overlay video, you can now auto slow-mo your turns. 9.2.0 - When creating an overlay video, you can now auto slow-mo your jumps. 9.0.7 - Telemetry Overlay. With this new feature you can upload a video of your ride, then sync it with the app’s telemetry data and export a video.
9.4.0 - Now overlay widgets can be enabled/disabled in Overlay Settings 9.3.0 - When creating an overlay video, you can now auto slow-mo your turns. 9.2.0 - When creating an overlay video, you can now auto slow-mo your jumps. 9.0.7 - Telemetry Overlay. With this new feature you can upload a video of your ride, then sync it with the app’s telemetry data and export a video.
9.3.0 - When creating an overlay video, you can now auto slow-mo your turns 9.2.0 - When creating an overlay video, you can now auto slow-mo your jumps. 9.1.1 - The start and end of the input video can now be trimmed while adding an overlay 9.0.7 - Telemetry Overlay. With this new feature you can upload a video of your ride, then sync it with the app’s telemetry data and export a video.
9.2.0 - When creating an overlay video, you can now auto slow-mo your jumps. 9.1.1 - The start and end of the input video can now be trimmed while adding an overlay 9.0.7 - Telemetry Overlay. With this new feature you can upload a video of your ride, then sync it with the app’s telemetry data and export a video.
9.1.2 - The start and end of the input video can now be trimmed while adding an overlay 9.0.7 - Telemetry Overlay. With this new feature you can upload a video of your ride, then sync it with the app’s telemetry data and export a video.
9.1.1 - The start and end of the input video can now be trimmed while adding an overlay 9.0.7 - Telemetry Overlay. With this new feature you can upload a video of your ride, then sync it with the app’s telemetry data and export a video.
Telemetry Overlay. With this new feature you can upload a video of your ride, then sync it with the app’s telemetry data and export a video.
Telemetry Overlay. With this new feature you can upload a video of your ride, then sync it with the app’s telemetry data and export a video.
Telemetry Overlay. With this new feature you can upload a video of your ride, then sync it with the app’s telemetry data and export a video. See a demo of an app generated video at the link below. https://youtu.be/Jqul6Y-U2Pw
Telemetry Overlay. With this new feature you can upload a video of your ride, then sync it with the app’s telemetry data and export a video. See a demo of an app generated video at the link below. https://youtu.be/syIpmlLmyok
Fixed a couple bugs and improved storage performance.
Live Segments - Any segment you have created or added to your favorites will now show up on the Segments screen while recording a ride. As you cross the start of the segment, you will see your projected segment completion time, delta from your personal record on the segment as well as the delta from the fastest segment time ever recorded by any rider.
Live Segments - Any segment you have created or added to your favorites will now show up on the Segments screen while recording a ride. As you cross the start of the segment, you will see your projected segment completion time, delta from your personal record on the segment as well as the delta from the fastest segment time ever recorded by any rider.
You can now follow your friends on MTB Hangtime. Select the Friends option from the upper right menu on the home screen. Improved permission handling.
You can now follow your friends on MTB Hangtime. Select the Friends option from the upper right menu on the home screen.
-Added a new two-way radio features that allow for quick and constant communication with friends while on the trail. Be sure to select the Radio checkbox when sharing with a friend on the Sharing Page. -Previously, if a segment was completed more than once on a ride, only the fastest segment time would be shown. Now, a segment can be completed multiple times on the same ride (say, lapping on a segment) and all of the segment times will be shown on the Segments Tab.
-Added a new two-way radio features that allow for quick and constant communication with friends while on the trail. Be sure to select the Radio checkbox when sharing with a friend on the Sharing Page. -Previously, if a segment was completed more than once on a ride, only the fastest segment time would be shown. Now, a segment can be completed multiple times on the same ride (say, lapping on a segment) and all of the segment times will be shown on the Segments Tab.
Improved offline support and improved performance when back matching a new segment to your ride history.
Added a graph on the Jump Details page that shows how the size of your jump compares with all other riders on the same jump.
Better handling when a rider is following a track, then travels off course for some time and eventually returns to the track.
Added option to see segment stats live while recording a new ride. The new Segment screen will show your projected completion time for the active segment as well as the split time from the ride your are following, your PR, and the KOM To see the live segments simply navigate to the Segments screen using the top navigation while recording a new ride. The Segments screen is only available when following a ride that shows matched segments on the Segments tab. If the ride you want to follow does not have any matched segments you can add one or more by clicking the Segment tab after opening a previously saved ride.
Added option to see segment stats live while recording a new ride. The new Segment screen will show your projected completion time for the active segment as well as the split time from the ride your are following, your PR, and the KOM To see the live segments simply navigate to the Segments screen using the top navigation while recording a new ride. The Segments screen is only available when following a ride that shows matched segments on the Segments tab. If the ride you want to follow does not have any matched segments you can add one or more by clicking the Segment tab after opening a previously saved ride.
Added a 3d map view that is available from the 2d elevation profile on the Map tab.
Segments - Segments are portions of a trail created by you or another rider. Segments can be added to any of your rides to track your personal best times, and the times of other riders. You can also track historical trends on a segment over the time to gauge how you are improving.